Read this article in 中文 Français Deutsch Italiano Português Español
MEC starts shipping first carry-deck crane in North America
17 November 2026
US-based MEC Aerial Work Platforms begun North American shipments of the CD-9T, a diesel carry-deck crane rated at 8.2 tonnes (9 US tons).
MEC’s new 9-ton carry-deck crane, the CD-9T. Photo: MEC
MEC introduced the CD-9T at CONEXPO-CON/AGG 2026.
The company is aiming it at the 8 to 10 US ton class, where it says operators and fleet managers have asked for better visibility, more cab space and easier service access.
“The carry-deck category has long been ready for a strong alternative,” said Paul Waller, MEC vice president of sales for North America. “Fleet managers will now be able to select a 9-ton pick-and-carry crane that solves the issues operators deal with every day: blocked sightlines, tight cabs, precision in confined spaces and equipment that needs to be easier to support.”
The CD-9T with extended boom. Photo: MEC
The CD-9T lifts 8.2 tonnes (18,000 lb) on outriggers and 5.2 tonnes (11,400 lb) on rubber. With the standard 3.05 m (10 ft) stowable boom extension, it reaches a maximum sheave height of 14.2 m (46 ft 8 in) and a maximum outreach of 12.3 m (40 ft 6 in). Without the extension, those figures fall to 10.5 m (34 ft 5 in) and 9.3 m (30 ft 6 in). The deck offers 20% more space across the front and back for carrying loads, according to MEC, and an electronic load management system shows lifting status on screen.
MEC redesigned the cab layout to improve sightlines. A low, side-mounted engine, similar to a telehandler layout, sits beside the cab, and the boom design is clean. Six onboard cameras give the operator a bird’s-eye view around the crane, and moving object detection alerts the operator to nearby activity. Perimeter laser lighting comes as standard, giving workers near the crane a visual reference during overhead work.
The enclosed cab has 25% more volume than competing models, MEC says. It comes with A/C and heat, a suspension seat and full-pressure hydraulic controls.
A hydrostatic 4WD system drives the crane, which has four steering modes: 4-wheel, crab, 2-wheel front and 2-wheel rear. It measures 1.98 m (6 ft 6 in) wide, has a 0.61 m (24 in) tailswing, climbs 40% gradients and travels at up to 24 km/h (15 mph).
For rental fleets, the side-mounted engine allows ground-level maintenance, and a swing-out rear counterweight opens up the boom for service.
CONNECT WITH THE TEAM